Showing posts with label shure. Show all posts
Showing posts with label shure. Show all posts

Sunday, August 20, 2017

Shure SRH-940 Hi-Fi Headphones Review

The SRH940s ship in a smart, padded case. Both cable and earpads are detachable, and the package includes spare earpads and a choice of straight or curly cables. These terminate in a 3.5mm mini‑jack with a screw thread allowing a quarter‑inch adaptor to be fitted, while the other end uses a smaller, 2.5mm mini‑jack with a plastic barrel that twists half a turn to lock into place. The phones themselves appear to be solidly built from a firm grey plastic, and the frame and earcup mountings incorporate plenty of flexibility, allowing the cups to be rotated in every conceivable direction, and probably some directions that are not readily conceived of.

The construction arrangement means that the cups exert slightly more pressure on and around the ear than some phones, but they are well padded and comfortable enough for long listening sessions, and this pressure ensures that isolation from external sounds is pretty good. For me, the only suggestion of discomfort came from the top band, which has a tendency to load the entire weight of the phones onto a small point on top of the head instead of spreading it out, but I suspect that has as much to do with the shape of my head as with the design of these phones. With an impedance rated at 42Ω and a sensitivity of 100dB SPL/mW, the SRH-940s shouldn't require any sort of esoteric headphone amp to drive them.
Shure SRH-940
Shure SRH-940 Headphones

Shure SRH940: Sound quality. The first thing that strikes us about the SRH940s is their immediate fidelity.

They’re a fast, energetic listening session, and open and revealing with it too – which goes slightly against the grain of their closed-back DNA. The rich synths of the track are conveyed explicitly, and there’s oodles of detail in the low-fi hi-hat part.
The mellow melody is nicely rounded, and the whole frequency range sits together really well, with nothing standing out too far or sitting too far back in the mix.

Shure SRH940: Verdict


Cons? Only a minor one: there’s a very slight spike near the top of the treble, which can occasionally stray into thinness during lean-sounding recordings, but it’s not a deal-breaker by any means.
Various adjectives come to mind to describe the sound preciseness of the SRH-940's, among them 'beat', 'crystal clear' and 'well-projected'. They seem to have a broad lift in the mid‑range, from perhaps 1‑3 kHz, which brings out the snarl of an electric guitar or the ring of a snare drum without over-emphasising sibilants or making crash cymbals leap out of the mix. They're perfect for rock music, or indeed anything else where the main focus is mid‑range impact and excitement. Transients are well represented, and the high frequencies seem balanced.

If there's a down side, it's that the bass is arguably a bit too tight. Whenever I turned to electronica, or indeed any mix that leaned on a heavy bottom end, I was struck with a gut feeling that something was lacking. It's not that bass and low mids are absent or inaccurate; rather, they are slightly overshadowed by that prominent mid range, in a way that sometimes robs them of 'oomph'. If you like bass to be an emotional experience, these are not the phones for you.
Shure SRH-940
Shure SRH-940

The SRH-940 will play at reasonable volume levels with portable devices such as most cellphones, iPods and so on. The straight cord feels strong enough to withstand some abuse, and with the earcups pulled all the way down and rotated against my chest, I can have the headphone around my neck all day long without it getting in my way when I'm not listening to it. It also comes with a coiled cord. Neither cord has an angled plug unfortunately. The other good news with the cord is that it's detachable. The other less-than-good news is that the detachable end is partially proprietary. The detachable plug is a standard sub-mini plug (next size smaller than a 1/8 inch mini-plug), but the plastic fitting behind that plug locks into the jack on the earcup in a way that would require DIY'ers to take the earcup apart if they want to use a different cable without the proprietary connector.
The earcups of the SRH-940 completely surround my ears, and it's a close fit. The internal space for ears in each oval earcup measure 2-5/8 by 1-7/8 inches. I find the fit very comfortable, but people with much larger ears may feel very cramped. The carrycase that comes with the SRH-940 is fairly large, and would take up a lot of space in a carry-on bag for airline travel. If this is your situation, I'd recommend carrying the SRH-940 around your neck when boarding, or just wrap it in something thin to place in a suitcase, to give it minimal protection. The entire headphone seems to be plastic except for the velour earpads, and Made In China means they optimized the SRH-940 for lowest production cost. The good news is that it seems to be very well made, and given the sound quality, a real bargain at the usual prices. Isolation from external sounds is good even when not playing music. When playing music, I can't hear the telephone ring from 3 feet away, and the ringer is the old-fashioned kind - very attention-getting.

The SRH-940 have an extended high-frequency response with incredible detail - so much so that upon first listen, you might think their response puts too much emphasis on the highs. For example, one of my colleagues commented that the SRH-940 were too sibilant when he first listened to them. On the contrary, I feel that the high-frequency response is actually exceedingly smooth. Yes, there is a small bit of high-frequency lift to my ears, but it's a very smooth rise, and to me, what I hear is the opposite of sibilance. There isn't any harshness in the 7-12 kHz range, which is where I find the most offensive energy in regards to sibilance. Moreover, the SRH-940's midrange is as neutral as any headphone I've ever heard. Vocals, for example, translate well between the SRH-940 and various listening-environment and speaker combinations throughout my studio and home - in terms of both relative level in the mix and harmonic content.

Compared to the Sennheiser HD800, which up until now were my favorite studio headphones, the SRH940 actually have less sizzle at the very top end, but the SRH-940's upper mids are a little more prevalent. The gentle lift in the HD800's lower mids isn't there in the SRH-940, so if you're using the Shure headphones for mixing, you might not try so hard to clean up what "muddiness" might be in your recording. And perhaps because of the more clinical-sounding lower mids and upper lows, the SRH-940 seem to exhibit less bass in general during casual listening, but the extreme lows are definitely there when you are listening critically, with a tightness that is astounding. With that said, I think that listeners who are accustomed to an overabundance of bass volume in their cans will definitely find the SRH-940 inappropriate for their needs, but I find the low-frequency clarity refreshing. Plus, transient response throughout is amazing.

The SRH940 come with a semi-rigid, multi-compartment carrying case that's too large for carry-on air travel, but it does protect the headphones well. The SRH-940 have hinges in all the expected locations, and they can fold up asymmetrically such that one earcup backs into the other (as opposed to the earcups facing each other). Once collapsed, they take up as much room as any other full-size folding headphones, but one advantage to this asymmetric arrangement is that there's less likelihood for pressure on the cable where it exits from the earcup. Speaking of the cable, you'll find two in the case - one straight and one coiled. Thankfully, the straight cable is just the right length for working at a console; you'll need to extend it if you plan to hand these headphones to a guitarist during tracking. The cables lock into the left earcup with a twist. You'll also find a second pair of velour ear cushions in the case.

The headphones are surprisingly light, and they're comfortable for extending wearing. The only caveat worth mentioning is that I found that the orientation of the SRH-940 on my head had a greater effect on the sound than with other headphones. For example, I can hear the bass levels go up when I rotate the earcups a bit so that the headband is just above my forehead - in fact, I get the most neutral-sounding response with the headphones positioned this way. Also, if I take off my glasses, the ear cushions seal better, and again, I get better bass response.

That said, we all know that reproducing sound to give maximum enjoyment is a very different business from reproducing it in a way that is useful to the mix engineer. And for most studio purposes, I think the frequency balance of these phones, with its ruthless absence of hype at the low end, is much more a blessing than a curse. Most mixes stand or fall on the mid-range, and you quickly appreciate the detail and clarity that these phones bring to that region. After a lot of listening, I even began to feel that my beloved Sony's V-150 were sounding muddy and veiled by comparison. I wouldn't want to make dubstep on these, but for any sort of guitar‑based music, they're hard to beat, and the good levels of comfort and isolation make them ideal for tracking as well as mixing.  

Tuesday, May 10, 2016

Shure BETA 87A Review

The Beta 87A is a premium quality, hand-held condenser vocal microphone from Shure. It is designed for professional lead or backing vocalists on stage and offers a smooth frequency response and high sound pressure level capabilities. It has a tight supercardioid pattern to provide excellent isolation from other instruments as well as helping to minimise feedback from stage monitors. It comes with a storage bag and stand adaptor and, like most condenser microphones, it operates on phantom power (between 12-52v).

The Beta 87A is designed with a low-frequency roll-off that helps to compensate for the microphone’s proximity effect (the boomy sound often associated with singing close to the mic). It has a tailored frequency response that features a presence rise that brightens the upper midrange and helps the vocals cut through the mix. Like the dynamic mics from Shure, the mic has a robust capsule suspension system to minimise handling noise. When comparing to similar dynamic microphones, the Beta 87A produces a similar punchy sound in the mid-range, but with the added warmth and open top-end that you would expect from a condenser microphone.

Although feedback rejection is good, if you accidently cup your hands over the grille at a gig it becomes quite prone to feeding back on stage. Also, although ideal for live vocals, its close pickup pattern reduces its usefulness as a microphone for other instruments such as acoustic guitar (like you might expect from a studio condenser mic).
Shure BETA 87A


Overall the Shure Beta 87A is an excellent vocal microphone that is well worth the investment if you are looking for top audio quality on stage. It produces a much more full and studio-like sound than dynamic microphones such as an SM58 and remains clear and undistorted. Saying this, its crystal clear sound may not make it the first choice for heavy rock singers, and rappers who like to cup their hands over the mic’s grille should probably look elsewhere too. At this level there is plenty of competition from other manufactures, however the Beta 87A holds its own against similarly priced alternatives such as the Audix VX-5 and Rode S1, as well as competing favourably against more expensive competition such as the Neumann KMS 105 and Sennheiser E965. If you are looking at upgrading your microphone; the Shure Beta 87A is definitely worth checking out.

In my home studio I have several condenser mics (Rode NT1,AKG and Audio Technica. The sound of a good condenser on vocals is a must for pro sounding recordings. Shure has managed to bring that sound to the stage for use in live performance. I have a decent Mackie based PA system (Mackie mixer and Mackie active speakers) and I must say that every positive reveiw is true. This is the best live vocal microphone I have ever used. For the past 25 years I have been faithful to Shure SM58 mics for vocals but now I am hooked on the Beta 87A. Yes they are expensive but if you can afford it they are worth it. Borrow one if you can and you'll see what I mean. If you have a high quality PA system you should have a high quality microphone and this is it.

Warning: The Shure Beta 87A (87 and 87C) along with the Shure Beta 58 are heavily counterfeited and sold on sites like Ebay and Craig's list. They look almost perect and come in perfectly duplicated Shure boxes with warrenty cards, mic pouches and mic collars. The first thing to check for if you get one is to see if it is actually a condenser mic. Most of the counterfeits out there are poor sounding dynamic mic capsules. Turn off your mixers phantom power and if the mic still works it's a dynamic fake not a real Shure condenser. Do a Google search for more ways to spot the fakes.

If you sing for a living, you deserve a Beta 87. It captures every nuance, rasp and grain of your voice in live performance, on par with many studio mics costing as much or more. You don't have to baby it, it's built like a tank and performs flawlessly in any weather.

A built-in electronic bass roll-off circuit lets you set the EQ on your mixer once and forget it. The clarity and quality of your voice remain basically the same. No Bruce Banner when it's far away, no Incredible Hulk when it's close, it's always balanced, warm and clean.
To guarantee break-proof operation, Shure offers no switches of any kind on its wired mic line. So you should choose the pattern or circuitry you want by the model.

Saturday, April 16, 2016

Shure PG27USB Condenser Microphone Review

Shure PG27USB Condenser Microphone Review


Shure's PG27 microphone represents the new breed of USB-based active mics, drawing both power and connectivity from a built-in USB interface.

Cardioid Condenser Microphone


The PG27-USB is a large-diaphragm condenser microphone with an onboard 16-bit, 48 kHz ADC and USB audio output. It is the USB version of Shure’s PG27, and shares most of its components and circuitry with that microphone.
The 35mm capsule has a diaphragm diameter of 27mm.
The mic has a switchable -20dB pad and three rotary controls:
◾Mic gain
◾headphone volume
◾monitor mix
An onboard 1/8-inch audio jack allows “zero-latency” monitoring of live audio. Its output volume, and its mix relative to a prerecorded track can be adjusted via two thumbwheels indicated above.
A three-color LED (located near the gain control, on the side of the microphone) can be used to monitor the signal level:
◾Off: -30dB FS
◾Green: -30dB–-12dB FS
◾Yellow: -12–0dB FS
◾Red: above 0dB FS (clipping)
A second LED, immediately below the Shure logo, lights up green to indicate the presence of appropriate USB bus power.
The PG27USB includes a 3m USB cable, a metal “ring mount” mic clip, and a zippered storage pouch.
The mic is compatible with the 'ShureLock' A27SM elastic shockmount and A32WS windscreen (available separately).
Many of the functions of the mixing console have been transferred onto the microphone itself – you'll find volume and gain controls, a -20db cut for noisy sources and, most importantly, on-mic live monitoring, which cuts out the usual latency that software monitoring suffers.
Monitoring is important when using condenser mics that have a limited range of perfect reception, so plugging in headphones helps you make sure you hit the spot.
Getting it set up is easy, and its monitoring circuit shows up as an additional output, meaning you can route your Mac's playback straight to the PG27's headphone jack to save switching your headphones over.

It's arguable how practical the PG27 would be for portable use given that you need a mic stand to go with it, but it does cut out the need for a mixing console, so you can record in the field with no external power.
It is also a shame that using multiple simultaneous sound sources is difficult in OS X – this is only a solution if you just use one microphone at a time. And if you do, we can't recommend it enough.
Officially, the Shure PG27USB works under both Windows and Mac operating systems and requires no drivers. But as it's simply a standard USB audio device, it also worked on Ubuntu 9.04 'Jaunty' with no configuration required either.

Using the Open Source 'Audacity', I simply selected the Shure microphone as my input and output devices and I was ready to go. I didn't have to fiddle around in any sound recorder settings as all of this is taken care of before the signal is digitised.
The microphone itself offers much more than meets the eye - it's really a microphone, preamp and monitor all in one. Adjusting the gain is done by a fairly standard roller dial and there is a -20db pad which reduces the gain if you happen to be in a really noisy room or in close proximity to an instrument - for example, a French horn.

There is an LED indicator, too, that has three colours: green so you know it's picking you up, yellow to show its near its peak and red if you're clipping. During recording, you want it to be green when there is sound, with the occasional yellow during the loudest parts. So for initial setup, all you have to do is run a few simple test sounds while adjusting the gain to find the perfect level - you don't even have to be recording at this stage.

You'll also notice a headphone jack built into the microphone. This is for zero latency monitoring. When using the sound card on the computer for monitoring, there can be a delay as the sound is processed before it's sent to the headphones. In this case, it comes directly from the preamp allowing you to monitor the recording in real time.

As well as providing an input to the computer, it also provides an output. So while recording, if you're playing the tracks you are layering over, these will be sent to the microphone to be mixed into the monitor for playback through your headphones.
There are two more roller dials on the microphone - one for adjusting the volume of playback through the headphones, and another to adjust the volume of the monitor (i.e what's coming through the microphone). This allows you to decide what you want to hear more of - the backing track, or yourself.

The outcome of this is, is that you can get almost everything setup without even having to turn your computer on. All of your settings will be completely independent to the machine too, so you could move between several machines and have consistent levels.
Being a unidirectional cardioid microphone, it also did a pretty good job of cutting out other background noises too.